常用詞語
Assembly line組裝線
Layout布置圖
Conveyer流水線物料板
Rivet table拉釘機
Rivet gun拉釘槍
Screw driver起子
Electric screw driver電動起子
Pneumatic screw driver氣動起子
worktable 工作桌
OOBA開箱檢查
fit together組裝在一起
fasten鎖緊(螺絲)
fixture 夾具(治具)
pallet棧板
barcode條碼
barcode scanner條碼掃描器
fuse together熔合
fuse machine熱熔機
repair修理
operator作業員
QC品管
supervisor 課長
ME制造工程師
MT制造生技
cosmetic inspect外觀檢查
inner parts inspect內部檢查
thumb screw大頭螺絲
lbs. inch鎊、英寸
EMI gasket導電條
front plate前板
rear plate后板
chassis 基座
bezel panel面板
power button電源按鍵
reset button重置鍵
Hi-pot test of SPS高源高壓測試
Voltage switch of SPS
電源電壓接拉鍵
sheet metal parts 沖件
plastic parts塑膠件
SOP制造作業程序
material check list物料檢查表
work cell工作間
trolley臺車
carton紙箱
sub-line支線
left fork*車
personnel resource department
人力資源部
production department生產部門
planning department企劃部
QC Section品管科
stamping factory沖壓廠
painting factory烤漆廠
molding factory成型廠
common equipment常用設備
uncoiler and straightener整平機
punching machine 沖床
robot機械手
hydraulic machine油壓機
lathe車床
planer |’plein;|刨床
miller銑床
grinder磨床
driller??床
linear cutting線切割
electrical sparkle電火花
welder電焊機
staker=reviting machine鉚合機
position職務
president董事長
general manager總經理
special assistant manager特助
factory director廠長
department director部長
deputy manager | =vice manager副理
section supervisor課長
deputy section supervisor =vice section superisor副課長
group leader/supervisor組長
line supervisor線長
assistant manager助理
to move, to carry, to handle搬運
be put in storage入庫
pack packing包裝
to apply oil擦油
to file burr 銼毛刺
final inspection終檢
to connect material接料
to reverse material 翻料
wet station沾濕臺
Tiana天那水
cleaning cloth抹布
to load material上料
to unload material卸料
to return material/stock to退料
scraped |’skr鎝id|報廢
scrape ..v.刮;削
deficient purchase來料不良
manufacture procedure制程
deficient manufacturing procedure制程不良
oxidation |’ ksi’dei;n|氧化
scratch刮傷
dents壓痕
defective upsiding down抽芽不良
defective to staking鉚合不良
embedded lump鑲塊
feeding is not in place送料不到位
stamping-missing漏沖
production capacity生產力
education and training教育與訓練
proposal improvement提案改善
spare parts=buffer備件
forklift*車
trailer=long vehicle拖板車
compound die合模
die locker鎖模器
pressure plate=plate pinch壓板
bolt螺栓
name of a department部門名稱
administration/general affairs dept總務部
automatic screwdriver電動啟子
thickness gauge厚薄規
gauge(or jig)治具
power wire電源線
buzzle蜂鳴器
defective product label不良標簽
identifying sheet list標示單
screwdriver holder起子插座
pedal踩踏板
stopper阻擋器
flow board流水板
hydraulic handjack油壓板車
forklift*車
pallet棧板
glove(s)手套
glove(s) with exposed fingers割手套
thumb大拇指
forefinger食指
midfinger中指
ring finger無名指
little finger小指
band-aid創可貼
iudustrial alcohol工業酒精
alcohol container沾濕臺
head of screwdriver起子頭
sweeper掃把
mop拖把
vaccum cleaner吸塵器
rag 抹布
garbage container灰箕
garbage can垃圾箱
garbage bag垃圾袋
chain鏈條
jack升降機
production line流水線
chain鏈條槽
magnetizer加磁器
lamp holder燈架
to mop the floor拖地
to clean the floor掃地
to clean a table擦桌子
air pipe 氣管
packaging tool打包機
packaging打包
missing part漏件
wrong part錯件
excessive defects過多的缺陷
critical defect極嚴重缺陷
major defect主要缺陷
minor defect次要缺陷
not up to standard不合規格
dimension/size is a little bigger尺寸偏大(小)
cosmetic defect外觀不良
slipped screwhead/slippery screw head螺絲滑頭
slipped screwhead/shippery screw thread滑手
speckle斑點
mildewed=moldy=mouldy發霉
rust生銹
deformation變形
burr(金屬)flash(塑件)毛邊
poor staking鉚合不良
excesssive gap間隙過大
grease/oil stains油污
inclusion雜質
painting peel off臟污
shrinking/shrinkage縮水
mixed color雜色
scratch劃傷
poor processing 制程不良
poor incoming part事件不良
fold of pakaging belt打包帶折皺
painting make-up補漆
discoloration羿色
water spots水漬
polishing/surface processing表面處理
exposed metal/bare metal金屬裸露
lack of painting烤漆不到位
safety安全
quality品質
delivery deadline交貨期
cost成本
engineering工程
die repair模修
enterprise plan = enterprise expansion projects企劃
QC品管
die worker模工
production, to produce生產
equipment設備
to start a press開機
stop/switch off a press關機
classification整理
regulation整頓
cleanness清掃
conservation清潔
culture教養
qualified products, up-to-grade products良品
defective products, not up-to-grade products不良品
waste廢料
board看板
feeder送料機
sliding rack滑料架
defective product box不良品箱
die change 換模
to fix a die裝模
to take apart a die拆模
to repair a die修模
packing material包材
basket蝴蝶竺
plastic basket膠筐
isolating plate baffle plate; barricade隔板
carton box紙箱
to pull and stretch拉深
to put material in place, to cut material, to input落料
to impose lines壓線
to compress, compressing壓縮
character die字模
to feed, feeding送料
transportation運輸
(be)qualfied, up to grade合格
not up to grade, not qualified不合格
material change, stock change材料變更
feature change 特性變更
evaluation評估
prepare for, make preparations for 準備
parameters參數
rotating speed, revolution轉速
manufacture management制造管理
abnormal handling異常處理
production unit生產單位
lots of production生產批量
steel plate鋼板
roll material卷料
manufacture procedure制程
operation procedure作業流程
to revise, modify修訂
to switch over to, switch---to throw--over switching over切換
engineering, project difficulty
工程瓶頸
stage die工程模
automation自動化
to stake, staking, reviting鉚合
add lubricating oil加潤滑油
shut die架模
shut height of a die架模高度
analog-mode device類模器
die lifter舉模器
argon welding氬焊
vocabulary for stamping
沖壓常詞匯
stamping, press沖壓
punch press, dieing out press沖床
uncoiler & strainghtener整平機
feeder送料機
rack, shelf, stack料架
cylinder油缸
robot機械手
taker取料機
conveyer belt輸送帶
transmission rack輸送架
top stop上死點
bottom stop下死點
one stroke一行程
inch寸動
to continue, cont.連動
to grip(material)吸料
location lump, locating piece, block stop 定位塊
reset復位
smoothly順利
dent壓痕
scratch刮傷
deformation變形
filings鐵削
to draw holes抽孔
inquiry, search for查尋
to stock, storage, in stock庫存
receive領取
approval examine and verify審核
processing, to process加工
delivery, to deliver 交貨
to return delivenry to.
to send delinery back
to retrn of goods退貨
registration登記
registration card登記卡
to control管制
to put forward and hand in提報
safe stock安全庫存
acceptance = receive驗收
to notice通知
application form for purchase請購單
consume, consumption消耗
to fill in填寫
abrasion磨損
reverse angle = chamfer倒角
character die字模
to collect, to gather收集
failure, trouble故障
statistics統計
demand and supply需求
career card履歷卡
to take apart a die卸下模具
to load a die裝上模具
to tight a bolt擰緊螺栓
to looser a bolt擰松螺栓
to move away a die plate移走模板
easily damaged parts易損件
standard parts標準件
breaking.(be)broken,(be)cracked 斷裂
to lubricate潤滑
